By utilizing cutting-edge global knowledge, expert professionals, international collaborations, and a fully equipped laboratory, chemFix has succeeded in offering its products to the market with superior quality and competitive pricing.
rial4.400.000
The fireproof resin for wood is ready to use. This coating can be applied to the surface using a roller or airless spray equipment. Depending on the required fireproofing grade, the coating can be applied in several layers. Subsequent layers should be applied once the previous layer has dried slightly.
No. | Test Specification | Test Method | Test Condition | Value | Unit |
---|---|---|---|---|---|
1 | Appearance | Visual | – | Clear solution | – |
2 | Density | ASTM D1963 | 23°C | 1.65±0.05 | g/cm³ |
3 | Solid Content | ASTM D4451 | 450°C, 60 min | 48±3 | Wt.% |
4 | Viscosity | ASTM D2196 | 23°C | 220±10 | Cps |
5 | pH | ASTM E70 | 23°C | 13.0±0.5 | – |
Available in 1, 10, and 20 kg containers.
Store in a dry environment at a temperature of 5 to 20°C. Protect from excessive heat.
Shelf life: 9 months in the original packaging.
If the wooden surface is used in a humid environment, an acrylic-based waterproof coating should be applied as a top layer.
Protect the surface from direct sunlight, freezing, rain, foot traffic, and high humidity until it is fully dry.
Do not apply the coating at air or surface temperatures below 0°C or above 35°C.
Avoid application during freezing conditions or rainfall.
Avoid contact with skin and eyes.
Avoid contact with eyes and skin, and wash your hands thoroughly after use. If contact occurs with eyes, skin, or if ingested, immediately seek medical attention. When not in use, ensure the container is sealed and preferably stored at low temperatures.
This product is water-based and environmentally friendly. It is used to fireproof cellulose and wood surfaces. The fireproof resin is applied to the wood surface, and it does not change the other aesthetic or mechanical properties of the wood. It only increases the fire resistance of the wooden surfaces.