Qom, Mahmoudabad Industrial Town, Phase 3, Resalat Street, Alley 42, Chemfix Company
By utilizing cutting-edge global knowledge, expert professionals, international collaborations, and a fully equipped laboratory, chemFix has succeeded in offering its products to the market with superior quality and competitive pricing.
rial8.450.000
The substrate surface must be solid, dry, and free from dust and oil. To control permeability and stabilize dust on the surface, use a primer. Any surface irregularities must be repaired with mortar before applying the adhesive.
Add 20 kg of adhesive to 4-5 liters of clean water and mix with a low-speed mixer until you get a smooth, lump-free paste.
Let the paste rest for 5-10 minutes to activate. After 1-2 minutes of re-mixing, the adhesive is ready for use.
For better adhesion, first, apply a thin layer of adhesive on the surface using the flat side of the trowel, and then comb it with the notched side of the trowel. The size of the notched trowel should be chosen according to the dimensions of the ceramics.
Apply tiles with even pressure on the surface. For better bonding, you can use a rubber mallet.
The normal installation conditions are a temperature of 24°C and 50% relative humidity.
Adverse weather conditions (high temperature, low humidity, wind, etc.) will reduce the working time and the adhesive’s lifespan.
If the installation time exceeds 30 minutes, scrape off the adhesive and discard it.
| Feature | Specification |
|---|---|
| Physical State | Powder (Solid) |
| Color | White and Gray |
| Specific Gravity | 0.1 kg/lit ± 1.7 |
| Mixability in Water | Soluble |
| pH | Alkaline |
| Chloride Content | None |
| Test Type | According to Standard | C2TES1 |
|---|---|---|
| Initial Adhesion after 30 minutes | EN 1348 | N⁄(mm²) ≥ 0.5 |
| Initial Tensile Adhesion Resistance | EN 1348 | N⁄(mm²) ≥ 0.1 |
| Tensile Adhesion Resistance after Heat Aging | EN 1348 | N⁄(mm²) ≥ 0.1 |
| Tensile Adhesion Resistance after Immersion in Water | EN 1348 | N⁄(mm²) ≥ 0.1 |
| Tensile Adhesion Resistance after Freeze-Thaw Cycle | EN 1348 | N⁄(mm²) ≥ 0.1 |
| Open Time | EN 1346 | 20 min |
| Slip | EN 1308 | mm 0.5 ≥ |
| Deformability | EN 12002 | mm 5 ≥ |
Tile and Ceramic Adhesive Powder is available in 20 kg bags.
Shelf life: Can be stored for up to 12 months in a dry, covered environment and in its original, unopened packaging.
Storage temperature: The optimal storage temperature range is +5°C to +40°C.
Storage conditions: Keep away from moisture, humidity, and direct sunlight.
Avoid stacking more than 10 bags on top of each other.
In adverse weather conditions such as high heat (above 35°C), strong winds, or direct sunlight, avoid using the adhesive.
Prepare the product exactly according to the mixing ratios and specified times as per the instructions.
Do not use the product if freezing is expected within the first 24 hours of installation.
For safety and to protect your hands and face, always wear gloves, goggles, and appropriate clothing.
Keep the product out of reach of children.
Do not inhale the adhesive powder.
Qom, Mahmoudabad Industrial Town, Phase 3, Resalat Street, Alley 42
09909142925 | 09909142924
