Qom, Mahmoudabad Industrial Town, Phase 3, Resalat Street, Alley 42, Chemfix Company
By utilizing cutting-edge global knowledge, expert professionals, international collaborations, and a fully equipped laboratory, chemFix has succeeded in offering its products to the market with superior quality and competitive pricing.
rial9.860.000
Installation of tiles and ceramics on various surfaces such as tiles, concrete, cement, natural and artificial stones, walls, and floors in public service areas, stairways, parking lots, factories, etc.
Suitable for installation in areas with direct exposure to water and moisture.
Can be used for tiling in both interior and exterior spaces.
Ideal for use in high-traffic areas.
Can also be used for tiling on existing tiles.
The consumption rate of powder tile adhesive depends on the condition of the substrate (porosity and surface irregularities) and the grooves of the tiles. However, the average usage is about 2.5 to 4 kg per square meter.
The surface should be firm, clean, dry, and free of dust and loose particles. Any loose paint or coatings should be removed before applying the adhesive. This adhesive can be used to level, align, and correct minor imperfections on the substrate up to a thickness of 5 millimeters, with sufficient drying time (at least 48 hours) required.
| Feature | Value |
|---|---|
| State | Powder |
| Color | White and Gray |
| Specific Gravity | 1.5 ± 0.1 kg/lit |
| Solubility in Water | Mixable with water |
| pH | Alkaline |
| Chloride Content | None |
| Test Type | Standard | Result |
|---|---|---|
| Initial Adhesion after 30 minutes | EN 1348 | N/mm² ≥ 0.5 |
| Initial Tensile Adhesion | EN 1348 | N/mm² ≥ 0.5 |
| Tensile Adhesion after Thermal Aging | EN 1348 | N/mm² ≥ 0.5 |
| Tensile Adhesion after Water Immersion | EN 1348 | N/mm² ≥ 0.5 |
| Tensile Adhesion after Freeze-Thaw Cycle | EN 1348 | N/mm² ≥ 0.5 |
| Deformability | EN 12002 | mm ≤ 2.5 |
Powder tile and ceramic adhesive is available in 20 kg bags.
Shelf Life: Can be stored for up to 6 months in a dry, covered environment in its original packaging.
Storage Temperature: The optimal storage temperature is between 10°C and 35°C.
Storage Conditions: Keep away from moisture, humidity, and direct sunlight.
Powder tile and ceramic adhesive is not considered hazardous to health or the environment. However, it should not be swallowed or come into contact with the eyes. In case of accidental contact with the skin or eyes, rinse immediately with plenty of clean water.
In the past, the traditional method of installing tiles and ceramics involved the use of lime, gypsum, and cement. However, with advancements in construction materials, modern adhesives have been developed that combine inorganic cements, graded silica sand, and dispersion polymers to provide better and more cost-effective bonding for tiles and ceramics. The Wall Tile Adhesive (C-100) contains Portland cement along with polymer additives, bonding enhancers, mineral fillers, and fibers, and is designed for installing various types of tiles, ceramics, and stones both inside and outside buildings. This product is completely waterproof and also has excellent adhesion, and once dried and set, it will not dissolve in water. Additionally, it possesses water-repellent properties. This product is a single-component adhesive, designed for bonding various types of stones, ceramics, and slabs.
This product meets EN 12004-TYPE C1S1 standards.
Qom, Mahmoudabad Industrial Town, Phase 3, Resalat Street, Alley 42
09909142925 | 09909142924
