Qom, Mahmoudabad Industrial Town, Phase 3, Resalat Street, Alley 42, Chemfix Company
By utilizing cutting-edge global knowledge, expert professionals, international collaborations, and a fully equipped laboratory, chemFix has succeeded in offering its products to the market with superior quality and competitive pricing.
rial8.650.000
Installation of various clay bricks.
The average consumption rate of clay Brick Adhesive is approximately 4 to 5 kg per square meter.
Mixing: Combine 7 liters of clean, non-salty water with the adhesive powder until a paste-like consistency is achieved. After mixing, wait 5 minutes to allow the mortar to set.
Application: Using a notched trowel, apply the mortar on the surface and back of the brick using the double bonding method.
Thickness: The adhesive layer should have a thickness of 3 to 10 mm. For better accuracy, it is recommended to use a trowel with grooves.
Use a notched trowel to control the amount and thickness of adhesive required for brick installation.
The adhesive must have the appropriate consistency for proper installation.
Under normal temperature and humidity conditions, the maximum working time is 20 minutes.
When working on a large vertical surface, the installation of bricks should be done in multiple stages with proper intervals to allow the underlying layer to dry and support the weight of new heavy bricks.
Do not use this adhesive in temperatures below 5°C.
The optimal temperature for drying is above 15°C.
| Feature | Specification |
|---|---|
| Physical State | Powder (Solid) |
| Color | White and Gray |
| Specific Gravity | 0.1 kg/lit ± 1.4 |
| Mixability in Water | Soluble |
| pH | Alkaline |
| Chloride Content | None |
| Test Type | According to Standard | C1TS1 |
|---|---|---|
| Initial Adhesion after 30 minutes | EN 1348 | N⁄(mm²) ≥ 0.5 |
| Initial Tensile Adhesion Resistance | EN 1348 | N⁄(mm²) ≥ 0.5 |
| Tensile Adhesion Resistance after Heat Aging | EN 1348 | N⁄(mm²) ≥ 0.5 |
| Tensile Adhesion Resistance after Immersion in Water | EN 1348 | N⁄(mm²) ≥ 0.5 |
| Tensile Adhesion Resistance after Freeze-Thaw Cycle | EN 1348 | N⁄(mm²) ≥ 0.5 |
| Slip | EN 1308 | mm 0.5 ≥ |
| Deformability | EN 12002 | mm 2.5 ≤ |
clay Brick Adhesive is supplied in 20 kg bags.
Storage duration: In proper storage conditions, in a dry and covered environment, and in its original packaging, the product can be stored for up to 6 months.
Storage temperature: The ideal storage temperature is between +10°C to +35°C.
Storage conditions: Keep away from moisture, humidity, and direct sunlight.
The powdered brick adhesive does not contain hazardous materials that are harmful to health or the environment. However, it should never be ingested or come into contact with eyes.
In case of accidental skin or eye contact, immediately rinse with plenty of fresh water.
Qom, Mahmoudabad Industrial Town, Phase 3, Resalat Street, Alley 42
09909142925 | 09909142924
